Clock Systems
Industry Solutions
Products & Accessories
line
Engineering Specifications
News/Events/New Products
line

HomeAbout UsContact UsSitemap

 
Products & Accessories  
 

On this page, go to Analog Clocks Independent Analog Clocks
Digital ClocksMaster ClocksAccessories

 

Analog Clocks

 

SAM Series Secondary Clock

• Universal clock with automatic communication protocol identification

• Fully automatic plug and play; No settings required

• Constant stream of communication and correction when used with Sapling System

• Available in 12” or 16” sizes

 

 

SRM Series Secondary Clock

• Uses 4-wire RS485 system

• Comparable to the SAR Series

• Unlimited clocks can be run on the same communication line when daisy chained

• Constant stream of communication and correction

System this product works with:
Two (2) wire digital communication, sync-wire communication

 

System this product works with:
RS485 communication

 

SAH Series Large Clock

• Multiple sizes to select from: 24", 36"

• Water resistant option

• Backlight option

• Fully automatic plug and play; No settings required

 

 

SAL Series Wireless Clock

• Each clock acts as a repeater and transmitter

• 915 - 928 MHz frequency hopping technology

• FCC Compliant, FCC part 15 Section 15,247

• Available in 12” and 16”

System this product works with:
Two (2) wire digital communication, sync-wire communication, RS485 communication

 

System this product works with:
Wireless communication

 

SAZ-1 Series Zone Clock with Frame

• Switch for time zone offset in one (1) hour increments

• Two (2) wire digital communication, or RS485 communication

• Built in self-test function

• Automatic polarity detection

 

 

SAZ-2 Series Zone Clock

• Switch for time zone offset in one (1) hour increments

• Two (2) wire digital communication or RS485 communication

• Built in self-test function

• Automatic polarity detection

• Frameless unit

System this product works with:
Two (2) wire digital communication, RS485 communication

 

System this product works with:
Two (2) wire digital communication, RS485 communication

 

SAZ-3 Series Wireless Zone Clock

• Switch for time zone offset in one (1) hour increments

• Each clock acts as a repeater and transmitter

• 915 - 928 MHz frequency hopping technology

• FCC Compliant, FCC part 15 Section 15,247

• Automatic calibration

 

System this product works with:
Wireless communication

   

back to top

 

 

Independent Analog Clocks

 

SAI Series Quartz Clock

• Proven time-keeping accuracy and reliability

• Custom colors and plating available

• A plethora of hand and dial designs

• Works on a single “AA” battery

 

 

SAE Series Electric Clock

• Custom colors and plating available

• A plethora of hand and dial designs

• Variety of lengths and colors for double mount

• Works with any standard wall outlet

System this product works with:
Independent

 

System this product works with:
Independent

back to top

 

 

Digital Clocks

 

SBD 1000 Series Secondary Clock

• Immediate correction for time change

• Choice of two (2) wire digital communication protocol or RS485 protocol

• Available in 2.5" and 4.0" red or blue displays

• "BELL", "FirE" messaging capabilities

 

 

SBD 2000 Series Master/Secondary Clock

• Master, slave and independent clock with chronograph capabilities

• "BELL", "FirE" and addressable messaging capabilities

• Interfaces with other systems

• Available in red or blue displays

System this product works with:
Two (2) wire digital communication, RS485 communication

 

System this product works with:
Two (2) wire digital communication, sync-wire communication, RS485 communication

 

SBL 1000 Series Wireless Clock

• Receives and transmits the signal once a minute

• Each clock acts as a repeater and transmitter

• Available in 2.5" and 4.0" red or blue displays

• 915 - 928 MHz frequency-hopping technology

 

 

SBZ-1 Series Zone Clock with Frame

• Switch for time zone offset in one (1) hour increments

• Choice of two (2) wire digital communication protocol or RS485 protocol

• Continuous frame for 5 or 7 time zones

• Available in 2.5”, 4” and 4 or 6 digit varieties

System this product works with:
Wireless communication

 

System this product works with:
Two (2) wire digital communication, RS485 communication

 

SBZ-2 Series Zone Clock

• Switch for time zone offset in one (1) hour increments

• Choice of two (2) wire digital communication protocol or RS485 protocol

• Frameless Units

• Available in 2.5”, 4” and 4 or 6 digit varieties

 

 

SBZ-3 Series Wireless Zone Clock

• Switch for time zone offset in one (1) hour increments

• Receives and transmits the signal once a minute

• Each clock acts as a repeater and transmitter

• Available in 2.5" and 4.0" red or blue displays

• 915 - 928 MHz frequency-hopping technology

• Frameless unit

System this product works with:
Two (2) wire digital communication, RS485 communication

 

System this product works with:
Wireless communication

back to top

 

 

Master Clocks

 

SBD 2000 Series Master Clock

• 2 wire digital communication and RS485 output

• Automatic Correction for Daylight Savings Time

 

 

 

SSM 2000 Series Master Clock

• TCP/IP connection to government’s atomic clock website

• 2 wire digital communication and RS485 output

• Once a day relay closure for synchronization to other systems


System this product works with:
Two (2) wire digital communication, sync-wire communication, RS485 communication

 

System this product works with:
Two (2) wire digital communication or RS485 communication

 

SMC 2000 Series Master Clock

• Ability to schedule up to 800 events and 255 schedules

• 2 wire digital communication and RS485 output

• Capable of correcting most existing clocks in the field

• Surface and rack mountable

 

 

SMC 3000 Series Master Clock

• RS232 connection to computer for use with MEditor scheduling software

• 2 wire digital communication and RS485 output

• Capable of correcting most existing clocks in the field

• Capable of interfacing with most fire systems for “fire” readout on digital clocks

System this product works with:
Two (2) wire digital communication, RS485 communication, sync wire communication

 

System this product works with:
Two (2) wire digital communication, RS485 communication, sync wire communication

 

Transmitter Master Clock

• Wireless Transmitter works with SAL and SBL wireless clocks

• FCC compliant section 15.247, utilizing frequency hopping technology

• 2 wire digital communication and RS485 output as well

• Once a day relay closure for synchronization with other systems

 

 

GPS Master Clock

• Includes gps antennae and 75ft cable

• 2 wire digital communication and RS485 output

• Once a day relay closure for synchronization to other systems

System this product works with:
Wireless communication

 

System this product works with:
Two (2) wire digital communication, RS485 communication, wireless communication (when used in conjunction with the wireless transmitter or repeater)

back to top

 

 

Accessories

 

Transformer

• Steps down 220 VAC/50 Hz or 120 VAC/60 Hz to 12 and 24 VAC

• Available in sizes from 6.2 amps to 31.2 amps

• Multiple knockouts for multiple entry points

 

 

• Extension of the SMC 2000 or SMC 3000 Series
Master Clock

• Expands up to twelve (12) relays

• Simple installation

System this product works with:
RS485, sync-wire

 

System this product works with:
All systems

 

Converter Box

• Converts RS485 signal to a 24 volt, two (2) wire digital communication system

• Provides a 5.5 amp, 24 volt output

• Protects against overloading and shorts, as well as high temperature damage

 

 

Surface Mounting

• Perfect choice for renovations where conduit is utilized

• Available in 12" and 16"

System this product works with:
Two (2) wire

 

System this product works with:
All systems

 

Universal Mounting Bracket

• Ideally used for mounting to an existing speaker baffle

• Slim design

 

 

Wire Guards

• Available for the 12" and 16" analog clock, and the 4.0" digital clock

• Constructed of 6 gauge and 9 gauge steel rods

• Zinc coated to protect from corrosion

System this product works with:
All systems

 

System this product works with:
All systems

 

Control Box

• Designed for use with the SBD 2000 Series digital clock

• Chronograph count up and count down timer

• Has full functionality of controlling the SBD 2000 Series digital clock

 

 

Wireless Repeater

• Transmits the Sapling wireless signal to the SAL and SBL series wireless clocks

• 915-928 MHz frequency-hopping technology

• FCC Complaint, FCC part 15, section 15,247

System this product works with:
Independent communication (when used in
conjunction with the SBD2000)

 

System this product works with:
Wireless communication

back to top

 
configuration station

Click here for information
on our wireless system! »

  GO

Clock SystemsIndustry SolutionsProducts & AccessoriesEngineering SpecificationsNews/Events/New ProductsHomeAbout UsContact UsSitemap

Website Design by DDA